­
18 02, 2021

INSTALLATION SYSTEMS OF UNSHAPED REFRACTORY MATERIALS (Part 1)

February 18th, 2021|Artículo Técnico, Hormigón Refractario, Noticias, Refractary Concretes, Technical Article|0 Comments

Nowadays the use of monolithic solutions based on the application of refractory concretes as replacement of bricks and shaped blocks in the majority of furnaces and process lines of industries such as cement, steel, foundries, incineration, frits and ceramic enamels, aggregates, etc. is absolutely established and mature. Equally important like the correct selection of the [...]

12 03, 2020

High-Efficiency Refractory Linings to reduce the impact of Cement plants on Greenhouse Gases emissions through fuels savings

March 12th, 2020|Artículo Técnico, Cement, Noticias, Refractary Concretes, Reyma News, Technical Article|0 Comments

SUMMARY Cement Industry has a very relevant impact on Greenhouse Gases emissions (GHG) at global level, causing the everyday more obvious Climate Change leading to environmental incidents, affecting our planet and ourselves. The industry is implementing practices aimed to the reduction of emissions, being one of the main initiatives the reduction of fossil (coals) or [...]

25 07, 2018

Introduction to refractory materials

July 25th, 2018|Refractary Concretes, Reyma News, Technical Article|0 Comments

INTRODUCTION TO REFRACTORY MATERIALS ABSTRACT The present article represents an introduction to the world of refractory materials, exposing the main definitions, classifications and uses on the main sectors of application. INTRODUCTION Refractory materials are in general relatively unknown by general public, industry and related technical studies, despite the fact that many refractories have been used [...]

28 09, 2017

REYMA Reotix present at the XXXIV Technical Congress FICEM 2017

September 28th, 2017|Congress, Refractary Concretes|0 Comments

XXXIV Technical Congress FICEM 2017 As in previous years, REYMA Reotix was present at one of the most important congresses of the cement industry worldwide. FICEM 2017 stands as one of the most important congresses of the cement industry worldwide. In this occasion, it was attended by representatives of the engineering and production areas of cement [...]

31 08, 2016

Reyma Reotix part in XXXIII FICEM 2016 Technical Congress

August 31st, 2016|Congress, Refractary Concretes, Reyma News|0 Comments

FICEM 2016, from 5 to 7 September 2016 in Cartagena, Colombia Reyma Reotix part in XXXIII FICEM 2016 Technical Congress, the most important meeting between suppliers and producers of Concrete Industry in Latin America We offer a Technical Presentation: Application of SOL-GEL technology for reduced shutdown and startup times. [...]

12 03, 2016

Protix Sistem

March 12th, 2016|Refractary Concretes, Technical Article, Video|Comments Off on Protix Sistem

PROTIX Antiwearing refractory concretes

11 03, 2016

Technical Article: PROTIX  SYSTEM antiwearing refractory concretes

March 11th, 2016|Refractary Concretes, Technical Article|Comments Off on Technical Article: PROTIX  SYSTEM antiwearing refractory concretes

Antiwearing Refractory Concretes The refractory concretes used to coat different areas of an industrial plant  are often not only exposed to high temperatures, but also to continuous wear by abrasion caused by particles in circulation, in the working temperatures. REYMA has developed a range of refractory concretes which have excellent mechanical strength both towards [...]